Aspire :: Bundles :: K8055 Acquisition Board

This section describes the bundle for K8055 sensors

1 Context

The Velleman K8055 is low-cost USB acquisition board with 5 digital inputs, 8 digital outputs, 3 analog inputs with attenuation and amplification option and 2 analogue outputs (PWM).

The K8055Producer bundle registers one Producer service producing Measurement, Double or String objects for digital and analog inputs …

2 Dependencies

This bundle requires :

  • LibUSB Java

3 Build

3.1 Sources

  • trunk/bundles/sensors/k8055producer/

4 Felix command

The bundle provides also a command for Felix

-> k8055 help
k8055 help                       : display this help
k8055 get d <value>              : get value
k8055 set d <value>              : set value
k8055 get d<port> <value>        : get value
k8055 set d<port> <value>        : set value
k8055 get a<port> <value>        : get value
k8055 set a<port> <value>        : set value

Syntax : k8055 [-p:(number)] [-d:(value)] [-a1:(value)] [-a2:(value)] [-num:(number) [-delay:(number)]] [-dbt1:(value)] [-dbt2:(value)] [-reset1] [-reset2] [-debug]
    * -p:(number) Set board address (0-3)
    * -d:(value) Set digital output value (8 bits in decimal)
    * -a1:(value) Set analog output 1 value (0-255)
    * -a2:(value) Set analog output 2 value (0-255)
    * -num:(number) Set number of measurements
    * -delay:(number) Set delay between two measurements (in msec)
    * -dbt1:(value) Set debounce time for counter 1 (0-7450 in msec)
    * -dbt2:(value) Set debounce time for counter 2 (0-7450 in msec)
    * -reset1 Reset counter 1
    * -reset2 Reset counter 2
    * -debug Activate debug mode

5 Links